Battery Impact Test Chamber tests the safety performance of battery through different weights from different heights and different stressed area to impact.The battery of the test sample shall be place ...
The Battery Impact Test Chamber assesses battery safety by simulating impacts with varying weights, heights, and stress areas.
1.Test Setup: Position the test battery flat with a 15.8 ± 0.2 mm diameter rod centered in a crisscross pattern.
2.Impact Procedure: Drop a 9.1kg or 10kg weight from 610mm or 1000mm onto the sample.
3.Orientation: For cylindrical batteries, align parallel to the plane; for square batteries, position the longest side perpendicular to the column and the largest face against the impact
direction.
4.Test Criteria: A single impact per battery; pass if no fire or explosion occurs.
1. UL1642: 2012, UL 2054 “Lithium Battery Standard”
2. UN38.3 “Lithium Batteries and Battery Pack Testing Standard Regulations”
3. IEC62133GB/T 18287-2013 “General Specification for Lithium Ion Batteries for Cellular Phones Heavy Object Impact Test”
4. GB 31241-2014 “Safety requirements for lithium-ion batteries and battery packs for portable electronic products”
5. GB-31241-2014 “Safety Requirements for Lithium Ion Batteries and Battery Packs for Portable Electronic Products”
6. QB/T2502 “General Specification for Lithium Ion Batteries”
| Model | HD-H206 |
| Weight | 9.1kg and 10kg; |
| Impact height | 0-1000mm (can be set); |
| Height display | LED meter display; |
| Displacement accuracy | ≤±5mm; |
| Impact method | free fall; |
| Control mode | PLC touch screen control; |
| Impact floor material | No. 45 steel, thickness 30 password; |
| Metal rod | 15.8±0.2mm (5/8 inch) steel rod; |
| Internal material | SUS#304 stainless steel plate, thickness 1.2mm; Teflon melt adhesive tape is applied to 1/3 of the place, high temperature resistance, corrosion resistance, insulation and easy to clean. |
| External material | cold-rolled sheet baking varnish treatment, thickness 1.5mm; |
| Pressure relief door size | 200x200mm; |
| Box door | a single door opens to the left, and an explosion-proof chain is installed on the side of the box door; |
| The maximum size of the battery tested | 200x200x200mm (width x depth x height); |
| Inner box size | 490x520x1430mm (width x depth x height); |
| Dimensions | 700x1000x1720mm (width x depth x height, including door lock); |
| Impact method | lift the falling ball to a certain height and release it, and the falling ball falls freely in the vertical direction, without tilting or shaking; |
| Power supply | 1∮, AC220V, 3A |
| Power supply power | 700W |
| Weight (approximately) | about 270kg |
