Electro-dynamic vibration Shaker provides a testing platform for packing and transportation simulation, mechanical shock, mission profile and any other real-world condition simulation. Utilizing the m ...
The Electromagnetic Vibration Table Test Machine is a sophisticated piece of equipment designed for simulating vibration environments to evaluate product reliability and performance.
This test machine is crucial for quality control, R&D testing, and scientific research due to its precise vibration control capabilities and wide adaptability across various industries.
1.Electronics and Electrical Industry
2.Automotive Industry
3.Aerospace
4.Defense and Military
5.Home Appliances and Consumer Electronics
6.Medical Equipment
7.Construction and Civil Engineering
8.Materials Science and Research
9.Biomedical Research
10.Transportation Industry
1.Versatile Vibration Control: Capable of fixed frequency, sweep frequency, and programmable operation modes, allowing for a wide range of vibration testing scenarios.
2.User-Friendly Interface: Equipped with a PLC touch screen control that displays linear dispersion diagrams and frequency waveforms in real-time, enhancing user interaction and data visualization.
3.Amplitude and Frequency Adjustment: Offers stepless amplitude adjustment and a frequency range of 5-500 Hz, accommodating various testing requirements.
4.Isolation and Synchronization: Features a vibration isolation device on the machine base for smooth operation and four-point synchronous excitation for uniform table vibration.
5.Safety and Precision: Includes an anti-interference circuit to protect against strong electromagnetic fields and ensures precise control of the vibration environment.
6.Data Management: Supports curve display and direct export functions for data analysis and record-keeping.
Shaker (Model# EDM-2000) | ||
Sine force (peak) | 50kN | |
Shock force (peak) | 100 kN | |
Frequency range | 1~4000 Hz | |
Displacement (continuous) | 100 mm | |
Max. Velocity | 2 m/s | |
Max. Acceleration | 100 G (980 m/s²) | |
Armature Diameter | 445 mm | |
1st order resonant frequency | 2,400 Hz | |
Allowable eccentric moment | >500 Nxm | |
Armature weight | 40 kg | |
HE/ST screw dimension | M10 (metric) | |
Axial vibration isolation frequency | <3 Hz | |
Max. Payload | 300 kg | |
Magnetic flux leakage | ≤1 mT | |
Dimensions (L×W×H, unpacked) | 1,330x860x1,250 mm | |
Weight (unpacked) | 2,500 kg | |
Installation | Rubber mat (anchor bolts required) | |
Power Amplifier (Model# VSA-H323A) | ||
Amplifier output | 30 kVA | |
SNR | >65 dB | |
Rated output voltage | 120 Vrms | |
Amplifier efficiency | > 90% | |
Dimensions (L×W×H, unpacked) | 800x900x2,100 mm | |
Weight (unpacked) | 500 kg | |
Blower (Model# PBL-W30) | ||
Air volume | 0.46 m3/s | |
Power | 7.5 kW | |
Air duct diameter | 200 mm | |
Air pressure | 8.8kPa | |
Installation | Able to connect to ceiling (up to two 90 degree bends), max 20’ run | |
Horizontal Slip Table (Model# 30ST-600M) | ||
Dimensions | 600x600 mm | |
Thickness | 45 mm | |
Frequency limit | 2,000 Hz | |
Effective mass | 54 kg | |
Note: 1. High pressure oil-film bearing is used for better uniformity. | ||
Vibration Controller and Accelerometer | ||
Vibration Controller VT-9008-4 | 4 Channel Vibration Controller with Sine and Self Calibration. | |
Accelerometer EA-YD-181 | 100mV/g, Range: 50g, Working Freq.: 1-10kHz, Weight: 11gram, with 10ft low noise cable | |
Other supported functions/accessories | ||
Environmental chambers | Supported | |
Mobile devices | Customizable | |
Insulation boards | Customizable | |
Fixture | Customizable | |
Working environment of the system | ||
Temperature range | 0-40℃ | |
Humidity range | 0~90% , no condensation | |
Power requirements | 380V/3ph/50Hz, 40kVA | |
Compressed air pressure | 0.6 Mpa | |
