Rapid-rate Thermal Cycle Test Chamber can evaluata the failure mechanical properties ofproduct;normally the temperature ramp rate is less than 20℃/min,which can achieve thereal application environment ...
Rapid-rate Thermal Cycle Test Chamber can evaluata the failure mechanical properties ofproduct;normally the temperature ramp rate is less than 20℃/min,which can achieve thereal application environment of testing sample by the fastest ramp rate.
The chamber is applied to the screening test and failure mode evaluation ofphotoelectric components,interconnection circuits,component units and electronicdevices.
1. Has cable ports are provided on the left side to allow easy wiring of specimens for measurement or voltage application;
2. The door equipped with hinges preventing auto-closing;
3. Can designed to comply with major environmental test standards like IEC, JEDEC, SAE...
4. High performance and quiet operation (80 dBA)
GB/T5170.2-2008 Temperature Test Equipment
GB/T2423.1-2008(IEC60068-2-1:2007)Tests:TestA-Cold
GB/T2423.2-2008(IEC60068-2-2:2007)Tests:Test B-Dry Heat
IEC60068-2-142009 Tests:Test N-Change Of Temperature
Item | Specification |
Internal dimension(W*D*H) | 800*600*850mm |
External dimension(W*D*H) | 1050*1510*1896mm |
Working capacity | 408 liter |
Internal chamber material | SUS#304 stainless steel, mirror finished |
External chamber material | Stainless steel with paint spray |
Temperature range | -70℃~+180℃ |
Temperature fluctuation | ±1C |
Humidity range | 10%~98%RH |
Humidity fluctuation | ±2.5%RH |
Humidity uniformity | 3%RH |
Sample tray | SUS#304 stainless steel, 2pcs |
Observation window | Tempered glass: 250*300mm |
Testing hole | Diameter 50mm, for cable routing |
Power supply source | Three-phase, 380V, 50Hz |
Safety protection device | Protection for leakage Over-temperature Compressor over-voltage and overload Heater short circuit |